You must be logged in and verified to contact the designer.
This is a pack of 9 z scale figures. I have never printed these figures out in z scale, so I purposely kept the pack size small. In the future I may add more figures if this pack prints out and folks are satisfied with the results. I do not do z scale myself but I do have one engine, so I will print these out and let you know how they turn out if you are interested. I purposely did not put sprews on these figures fearing that they are so small removing them would surely break the figures apart. I positioned these figures on top of each other instead of in back of each other to help facilitate the printing process so the dimensions might seem a little large. Those dimensions are actually the total depth of the print. The Albert figure with his hand raised is a total of 9mm high at the top most tip of his fingers. So these figures should scale out fine given that the average height of a chair in the U.S. is 17 to 20 inches. All my smaller scale figures begin as higher resolution 3D figures which I print for prototypes for my own usage and casting. I also enjoy animating these sculpts as you can see in the video below that shows an historic 0-4-0 engine I am also modeling with one of the figures in this pack as it's engineer.