JaBird RC SCX10/10.2 CMS Plate

This SCX10/SCX10ii CMS plate is designed to lets you extend your axle forward for a better approach angle. 

We recommend replacing the stock panhard bar and panhard mount and use the JaBird RC SCX10 & 10.2 Panhard Mount - http://shpws.me/RIj8.   **This design only fits the Axial SCX10/SC10ii metal chassis rails**.

Next to the servo you can place electronics or a smaller battery for the weigh conscious crawler.  The battery/electronics  area is about 3-1/8 x 1-5/8" with battery strap slots included.  

Also, we recommened using M3 button head screws in the forward SCX10II shock-hoops screws with the nut to the outside, and M3 x 10mm servo mount screws (oversize flat hex socket screws; Axial AXA0109) to mount the servo on top of the plate with screws installed from the bottom side.  We have also allowed for the use of a fourth-hole bumper screw by preassembling the cross-braceces first before tightening all the screws.

Be sure to pre-drill the small holes with a 3/32" diameter drill before mounting.

***Do NOT use the rubber or brass harwardware that is funished with your servo.  If your servo is plastic remove the gussets as the servo needs to mount flat to the servo plate***