Product Description
This is the TM8 axle housing created to match our GCM CMAX chassis. This is a Coil Spring mounted axle housing with separate dampers, for the rear.
This axle will require TM8 Axle Cover for assembly.
This axle will require TM8 internal parts found at GCMRacing.ca and TinyTrucks.com websites, and includes bearings, gears, hardware, etc to assemble the axle completely.
Link for Axle internal parts here: http://gcmracing.ca/viewitem.php?productid=381
This Coil spring mounted axle will require the large holes to be cleaned out with a 3/32 or 2.5mm drill. The small holes should be cleaned out with a 1/16 or 1.5mm drill before assembly.
You may have to clean out the print dust from the main axle tube holes as well. Please use a 13/64 drill to clean out the main tube holes.
This axle will require TM8 Axle Cover for assembly.
This axle will require TM8 internal parts found at GCMRacing.ca and TinyTrucks.com websites, and includes bearings, gears, hardware, etc to assemble the axle completely.
Link for Axle internal parts here: http://gcmracing.ca/viewitem.php?productid=381
This Coil spring mounted axle will require the large holes to be cleaned out with a 3/32 or 2.5mm drill. The small holes should be cleaned out with a 1/16 or 1.5mm drill before assembly.
You may have to clean out the print dust from the main axle tube holes as well. Please use a 13/64 drill to clean out the main tube holes.
Details
What's in the box:
TM8 Rear Link Split Coil 4 Link
Dimensions:
15.97 x 3.26 x 4.18 cm
Switch to inches
6.29 x 1.29 x 1.64 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
