Gray PA12
USB Sidecar for MiSTer Case B Shell (1/2) (v1.1)
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$38.88
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
MiSTer Sidecar USB case add-on usable with MiSTer USB Hub v1.1 daughter board
USB Sidecar for MiSTer Case Bottom Shell (Part 1 of 2)
Sidecar will work with MiSTer - Case Universal v5.2
and
Sidecar will work with MiSTer - Case Universal v1.2 :)
Four 2.5-3 mm screws are needed to more firmly attach the front and rear panel. Both panels act as brackets and will hold on to the MiSTer Case. (If you do not like the additional holes print the no_holes version of the shell.)
For assembly make sure to only slide the panels fully in after you attached them to the MiSTer case. You can also try sliding one panel in (all the way) and then try to attach the case will sliding in the remaining panel in an angle. Take your time and do not force it.
An example of items to be ordered together to assemble a full Sidecar USB case:
1x USB Sidecar for MiSTer Case B Shell (1/2) (This part)
1x USB Sidecar for MiSTer Case Panels (2/2) https://www.shapeways.com/product/3QXMWLZSV/usb-sidecar-for-mister-case-panels-2-2?optionId=67607232
For more info:
https://github.com/MiSTer-devel/Main_MiSTer/wiki
http://www.atari-forum.com/viewtopic.php?f=117&t=34098
USB Sidecar for MiSTer Case Bottom Shell (Part 1 of 2)
Sidecar will work with MiSTer - Case Universal v5.2
and
Sidecar will work with MiSTer - Case Universal v1.2 :)
Four 2.5-3 mm screws are needed to more firmly attach the front and rear panel. Both panels act as brackets and will hold on to the MiSTer Case. (If you do not like the additional holes print the no_holes version of the shell.)
For assembly make sure to only slide the panels fully in after you attached them to the MiSTer case. You can also try sliding one panel in (all the way) and then try to attach the case will sliding in the remaining panel in an angle. Take your time and do not force it.
An example of items to be ordered together to assemble a full Sidecar USB case:
1x USB Sidecar for MiSTer Case B Shell (1/2) (This part)
1x USB Sidecar for MiSTer Case Panels (2/2) https://www.shapeways.com/product/3QXMWLZSV/usb-sidecar-for-mister-case-panels-2-2?optionId=67607232
For more info:
https://github.com/MiSTer-devel/Main_MiSTer/wiki
http://www.atari-forum.com/viewtopic.php?f=117&t=34098
Details
What's in the box:
Sidecar_USB_B_Shell_v2_fixed
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
