This is what you'll receive if ordered in white.
CK3 Chassis Kit for 1/32 Scale LMP MagRacing Car
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$26.69
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Here is a magracing chassis kit with an adjustable wheelbase designed specifically for a Le Mans Prototype (LMP) body. Helps you build a magracing chassis to fit your existing 1/32 scale, model race car body. Kit requires other parts to complete. CK3 is similar to CK4 with the following significant differences:
1. CK4 has a slightly thinner side profile which reduces the amount of interior that might have to be removed for the chassis to fit the body.
2. CK4 has a battery compartment that must be loaded from the top which requires removal of the body.
3. CK4 uses bronze strip for battery contacts instead of magnets.
4. CK4 can navigate slightly tighter corners.
5. CK4 has a minimum wheelbase of 3.20" conpared to 3.25" for CK3.
Features of CK3 include the following
Adjustable wheelbase from 3.25” to 3.55”.
Inline motor configuration where the motor shaft runs perpendicular to the rear axle.
Frontend design incorporates 1 degree of positive toe and 2 degrees of negative camber which greatly improves handling and lane changing.
Shorter front suspension beams allow for narrower front track.
Accommodates narrower rear track too.
Super thin profile with inline motor accomodate low front and rear cowling.
Accommodates protected and unprotected 10440 rechargable batteries.
Does not require removal of body to change battery.
Weighs less than original stock chassis.
Requires crown gear on rear axle.
Use with steering coil, printed circuit board, battery, motor, pinion gear, and some of the screws, nuts and magnets of a standard magracing chassis which you already have. Designed to be used with 3/32" diameter front and rear axles, along with wheels, and tires typically used on 1/32 slot cars.
Purchase a few other screws and magnets separately from MagRacingUnlimited, or others.
For detailed assembly instructions click here.
1. CK4 has a slightly thinner side profile which reduces the amount of interior that might have to be removed for the chassis to fit the body.
2. CK4 has a battery compartment that must be loaded from the top which requires removal of the body.
3. CK4 uses bronze strip for battery contacts instead of magnets.
4. CK4 can navigate slightly tighter corners.
5. CK4 has a minimum wheelbase of 3.20" conpared to 3.25" for CK3.
Features of CK3 include the following
Adjustable wheelbase from 3.25” to 3.55”.
Inline motor configuration where the motor shaft runs perpendicular to the rear axle.
Frontend design incorporates 1 degree of positive toe and 2 degrees of negative camber which greatly improves handling and lane changing.
Shorter front suspension beams allow for narrower front track.
Accommodates narrower rear track too.
Super thin profile with inline motor accomodate low front and rear cowling.
Accommodates protected and unprotected 10440 rechargable batteries.
Does not require removal of body to change battery.
Weighs less than original stock chassis.
Requires crown gear on rear axle.
Use with steering coil, printed circuit board, battery, motor, pinion gear, and some of the screws, nuts and magnets of a standard magracing chassis which you already have. Designed to be used with 3/32" diameter front and rear axles, along with wheels, and tires typically used on 1/32 slot cars.
Purchase a few other screws and magnets separately from MagRacingUnlimited, or others.
For detailed assembly instructions click here.
Details
What's in the box:
CK3 Chassis Kit for 1/32 Scale LMP MagRacing Car
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
