Click and drag to rotate
SCX10 Rear Upper Link Riser - Extended (EXT-RULR) 3d printed

Not a Photo

Black Natural Versatile Plastic
SCX10 Rear Upper Link Riser - Extended (EXT-RULR) 3d printed
SCX10 Rear Upper Link Riser - Extended (EXT-RULR) 3d printed

Not a Photo

SCX10 Rear Upper Link Riser - Extended (EXT-RULR)

Made by
Ships as soon as 9 days
3D printed in black nylon plastic with a matte finish and slight grainy feel.

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
  • Super Light - Weighs only 3 grams for the pair!
  • Improves performance on uphill climbs - typically 2 degrees better.
  • Works with stock SCX10 Chassis and skid, no modifications necessary!
  • Also compatible with the SCX10.2 Chassis.
  • Raises your mount up 15 mm and back about 8 mm to clear large motors and large drive shafts.
    *You may have to change your rear upper links to accommodate the extended mount. A 5 mm shorter link is recommended.
  • Stronger than the ABS versions - Nylon will stand up to much more abuse!
  • Keys into chassis to prevent rotation
  • Extremely easy to install, requiring no drilling and minimal effort.

Note: The part comes on a part tree, and each piece will need to be removed from the tree. This may leave a white dot where the tree connected to the part.
What's in the box:
4.25 x 0.65 x 2.5 cm
Switch to inches
1.67 x 0.26 x 0.98 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.