Black Natural Versatile Plastic
CrossCanyon JKU Battery Tray
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$58.96
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is the rear battery tray for the CrossCanyon chassis when using the NewBright 4dr Jeep JKU body. This item must be used with the CrossCanyon Rear Hinge to complete the rear mounting system.
This item will be mounted to the rear frame holes on the CrossCanyon. It will hinge on these 2 back holes, and remain with the chassis. There are velcro battery strap holes in the floor of this part to accept your battery mounting. The item has clearance side slots to fit around the screws used in Cantilever Suspension brackets. If not using Cantilever suspension in the rear, then please add a screw in the frame hole with a nut, to act as a battery tray stop, so it won`t hang on the rear axle.
You are required to clean out all holes with a 3mm or 1/8 inch drill before assembly.
One item needed per truck.
This item will be mounted to the rear frame holes on the CrossCanyon. It will hinge on these 2 back holes, and remain with the chassis. There are velcro battery strap holes in the floor of this part to accept your battery mounting. The item has clearance side slots to fit around the screws used in Cantilever Suspension brackets. If not using Cantilever suspension in the rear, then please add a screw in the frame hole with a nut, to act as a battery tray stop, so it won`t hang on the rear axle.
You are required to clean out all holes with a 3mm or 1/8 inch drill before assembly.
One item needed per truck.
Details
What's in the box:
CrossCanyon JKU Battery Tray
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
