You must be logged in and verified to contact the designer.
This log delimber is the type based on those built by Pro Pac. These are mounted on a carrier such as an excvator body by Caterpillar or John deere etc. It picks the logs up puts it through the collar below the main body and shoves it through using the long rail to hold it and slide back and forth. There is also a saw in the front head which cuts off the log to the correct length for transport. There is a lot of operation here, so be very careful separating the parts from the sprues. Although I provide the pins for the cylinders, grapples etc, I strongly suggest one replace them with stronger material such as brass or styrene rod. Look at the pictures for assembly, or google 'delimber' and you'll find some that should easily guide you. I made the base generic as possible, but some addition, deletion or modification may need to be made depending on what vehicle you're mounting it on. Should there be a question or concern, contact me via the designer link or direct via email to email@example.com