Click and drag to rotate
22,48mm Cowl Ventilator - 4 ea 3d printed

DIGITAL PREVIEW
Not a Photo

Smooth Fine Detail Plastic
22,48mm Cowl Ventilator - 4 ea 3d printed
22,48mm Cowl Ventilator - 4 ea 3d printed

DIGITAL PREVIEW
Not a Photo

22,48mm Cowl Ventilator - 4 ea 3d printed
22,48mm Cowl Ventilator - 4 ea 3d printed

DIGITAL PREVIEW
Not a Photo

22,48mm Cowl Ventilator - 4 ea

Made by
$22.35
Ships as soon as 7 days
3D printed in matte translucent plastic that showcases fine and intricate details.
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
This is based on the Standard Pattern Cowl Ventilator as made to Classification Society Rules. The trunk (the smaller tube that goes into the deck) is made to connect to Evergreen #234 tubing. The Cowl is .876 in. dia. The trunk matches the tubing at .438 in. and has a small stud .340 in. dia. that matches the tubing I.D. This way you can make the ventilator any height you desire. These were designed for the Boiler Room for an O scale / 1:48 ship. The Boiler Room ventilators were larger than the ones used for the Engine Room as they (Boiler Room) had a secondary purpose in that they were also used as elevator shafts to lift ash buckets which were used to raise and dump ashes over the side into the dump scows while in harbor, if the steamer is a coal burner.

See line-drawing for exact measurements of all cowl ventilators
Details
What's in the box:
1:48 Boiler Room Cowl Ventilators Ver2 - 4ea
Dimensions:
1.56 x 9.88 x 3.78 cm
Switch to inches
0.62 x 3.89 x 1.49 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.