Click and drag to rotate
045018-00 Omega Rear Arms 3d printed

Not a Photo

Gray PA12
045018-00 Omega Rear Arms 3d printed
045018-00 Omega Rear Arms 3d printed

Not a Photo

045018-00 Omega Rear Arms

Print With Shapeways
Choose Your Material
Basic Materials Best Value
Shop Owner Recommendations
Choose your color and finish

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
The Ampro Omega Rear Suspension is the ultimate upgrade for the Tamiya Hornet & Grasshopper. Though a major operation, the kit will leave you with a Hornet that can handle! Please note that the parts you get here need to be accompanied with the following parts to complete the set. You will also need a number of additional parts available at your hobby shop and eBay. Stock rear wheels will no longer work. Hex drive wheels, 2.2” should work but not all can be tested. Ampro makes a set for the Omega rear end.

****Note that significant modifications are needed if you run a Grasshopper body. ****

This is the 045018-00 Omega Arms. 045018-01 Is availible if you want to add a sway bar. 

045017-00 Omega 0° Deg Hub Carriers

045017-01 Omega 1.5° Deg Hub Carriers

045017-02 Omega 3° Deg Hub Carriers

 045019-00 Omega Frame


045007-01 Hornet Shock & Wing Mount

045007-02 Hornet Shock & Ampro Wing Mount

(for use with Ampro Wing, display only)

045007-03 Hornet Shock & Heavy Duty Wing Mount

(body may need light modification to fit)

045007-04 Hornet Shock Mount


045005-01 AMPro Hornet Battery Tray Retainer

(See episode 60 for installation)


045015-01 Shock Eyelet, 16.75mm



Rim003-00 2.2” Wheel, 0mm Offset

Rim003-03 2.2” Wheel; 3mm Offset

Rim002-19 2.2" 19mm Offset Rear Wheel



Axles- Tamiya DF03RA & TA04


RC Joint Cups, Tamiya Part Number: 9804181

Comes in 2 and 4 pieces, 2 needed


Two 5x8x2.5 Ball Bearings


4x 5X11 Ball Bearings




2x 20mm M3 Machine Screws

4x 16mm M3 Machine Screws

12x 12mm Long Self Tapping Screw

4x 8mm Long Self Tapping Screw

4x 4.8mm diameter x 10mm long Ball Studs

4x 4.8mm Ball Cups

1x 3mm threaded rod, 100mm long is fine

6x Screw pins, 30mm long at least (longer is better, cut to length

1.6mm diameter, 1000mm Long Piano Wire for sway bar (optional)

16x M3 Washer, 0.5mm thick max

10x M3 Locknuts

4 Tamiya 4mm diameter x 6mm length brass sleeves

2x Tamiya Spring Mount (H4)

What's in the box:
045018-00 Omega Arms
5.91 x 3.26 x 5.33 cm
Switch to inches
2.33 x 1.28 x 2.1 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.