White Natural Versatile Plastic
Propeller hanger for rubber powered free flight
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$12.02
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Propeller hanger / front bearing for rubber powered free flight, 12pcs.
If you need some, but with a little different measurents or thrust angles, let me know. I will change it and upload the new variant to my shop.
Measurements:
-For fuselage stick size 9x3mm
-Bearing tube ID 0.7mm, OD 2.6mm (after printing the hole is probably full of nylon powder and needs to be drilled open, it can also be enlargened to suit your prop shaft)
-Bearing tube center hangs 6mm below the fuselage stick "box"
-Material thickness 1.0mm for the fuselage box
-Material thickness 1.3mm for the support between fuselage box and bearing tube
-Left thrust 3 degrees
-Down thrust 3 degrees
-Weight about 0.6g (White strong and flexible)
If you need some, but with a little different measurents or thrust angles, let me know. I will change it and upload the new variant to my shop.
Measurements:
-For fuselage stick size 9x3mm
-Bearing tube ID 0.7mm, OD 2.6mm (after printing the hole is probably full of nylon powder and needs to be drilled open, it can also be enlargened to suit your prop shaft)
-Bearing tube center hangs 6mm below the fuselage stick "box"
-Material thickness 1.0mm for the fuselage box
-Material thickness 1.3mm for the support between fuselage box and bearing tube
-Left thrust 3 degrees
-Down thrust 3 degrees
-Weight about 0.6g (White strong and flexible)
Details
What's in the box:
Sakara_D30_L30_12PCS
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
