NEW: Natural and Polished Copper

Click and drag to rotate
1/285 KV-8S 3d printed

Not a Photo

Smooth Fine Detail Plastic
1/285 KV-8S 3d printed
1/285 KV-8S 3d printed

Not a Photo

1/285 KV-8S

3D printed in matte translucent plastic that showcases fine and intricate details.

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
The first of the many experimental modifications that the Soviets made to the KV-1S.  This particular model is armed with a flamethrower in the turret, which is unusual for WWII flame tanks, which usually had the flamthrower mounted in the front of the hull, replacing the hull machine gun.  Because the flamethrower was in the turret, the 76.2mm cannon was swapped out with a 45mm cannon placed inside a dummy 76mm tube to fool the Germans.  However, the gun was considerably shorter, so I don't know how well that actually worked.  Overall, flame tanks were never that popular with the Red Army, and although this one was slightly more popular than the original KV-8, only 42 were made.  An additional 25 were made with the flamethrower mounted in a KV-1 turret on the KV-1S hull, and it was still called KV-8S.  You can make this one by putting the turret from my KV-8 model onto the hull included with this one.

Ordering the small variant will give you a single tank.
Ordering the medium variant will give you two tanks.
Ordering the large variant will give you five tanks.
What's in the box:
1_285 KV-8S print arrange
1.97 x 2.4 x 0.67 cm
Switch to inches
0.78 x 0.95 x 0.27 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.
Sign In or Join to comment.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.