1:84 (wide edition) HMS Victory Figurehead
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$26.76
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is a model of HMS Victory's figurehead. It is modeled based on plans in Arthur Bugler's "HMS Victory - Building restauration and repair" and by pictures of the real thing.
The figurehead consists of 6 parts which are fixed on a sprue. Plase be careful when cutting off and sanding away the remaining material.
This is a special version of the figurehead, which is made for a 1/84 kit where the "knee of the head" (or the "stem" as it is often referred to in model plans) is 6mm thick. At 1/84 the width would really be about 3.3 mm, so I had to make compromises to allow that width.
The material of this part is "Smoothest Fine Detail Plastic" to ensure the hights quality. Painting with acrylic paints is recommended. For further handling instructions of the material please see here: Handling of 3D printed scale model parts
The figurehead consists of 6 parts which are fixed on a sprue. Plase be careful when cutting off and sanding away the remaining material.
This is a special version of the figurehead, which is made for a 1/84 kit where the "knee of the head" (or the "stem" as it is often referred to in model plans) is 6mm thick. At 1/84 the width would really be about 3.3 mm, so I had to make compromises to allow that width.
The material of this part is "Smoothest Fine Detail Plastic" to ensure the hights quality. Painting with acrylic paints is recommended. For further handling instructions of the material please see here: Handling of 3D printed scale model parts
Details
What's in the box:
FigureHead_84_v2_wide
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
