You must be logged in and verified to contact the designer.
Here are two mods for the Axial SCX24 in one package! The first part is a super low CG battery tray that works with an aftermarket battery. It lowers the battery between the frame rails and the motor as much as possible without interfering with the driveshaft or rear suspension. It is designed to work with batteries such as the Beta FPV 2s 350mAh lipo.https://www.amazon.com/BETAFPV-Battery-Silicone-Beta75X-Brushless/dp/B07JG3ZFC5 Batteries sold separately, and you will have to either make an adapter or change the plug type to be compatable with the stock ESC/RX unit. (JST-PH 2.0)
The second part is a revised rear shock tower with four mounting holes. The stock position is retained, and the additional holes allow for variations in ride height and for using longer shocks such as the Losi Micro Crawler shocks for more articulation.
**IMPORTANT** You should use either a 1.1mm or a #57 (.043") drill bit to clean out the screw holes. There is always a small amount of unsintered powder left in deep holes despite the cleaning process.