1/600 Royal Navy WW2 Boat Set Number 1 without Mounts/Cradles. This is a highly detailed set and has been created to replace the plastic blobs :-) that represent Ships Boats on most kits. Please see My Shop for version with the Mounts/Cradles in place.
Contains the following boats:
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
- 35 Foot Fast Motor Boats x2
- 32 Foot Motor Cutters x2
- 32 Foot Cutters x2
- 27 Foot Whalers x2
- 14 Foot Dinghys x2
- NOTE: This set DOES NOT contain the boat supports for those wishing to use Photo Etch or the supports on the kit. See My Shop for version of this set with detailed supports printed on the boats for ease of use.
- Available in other scales.