Click and drag to rotate
D8443 Gear 3d printed

Not a Photo

White Natural Versatile Plastic
D8443 Gear 3d printed
D8443 Gear 3d printed

Not a Photo

D8443 Gear

Made by
Print With Shapeways
Choose Your Material
Choose your color and finish

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
This is a replica design for the Magnavox D8443 cassette mechanism gear which has been prone to failure in the original manufacturer's design. The replica design has been tested and used for more than four years for durability and accuracy. The gear may also work on similar cassette mechanisms on systems built by Magnavox and Philips.

It is recommended to use "White Natural Versatile Plastic" material for manufacture. Other materials are listed for those who wish to experiment. I have not tested the other materials. You will probably need to re-bore the center hole of the gear upon receipt. Use a 5/64" drill bit and manually bore out the excess dry powder material. Do not use power drills, nor do not wiggle the bit in the hole when clearing out material.
What's in the box:
D8440 Gear
2.37 x 2.36 x 0.61 cm
Switch to inches
0.93 x 0.93 x 0.24 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.