Product Description
**This is for the AMPro Body. For the stock body, please use 058010-11**
Ampro Engineering Introduces the ultimate upgrade for the Tamiya Hornet. This is a complete system that will not only increase the structural integrity of the Hornet Chassis but completely changes the look to a sleeker, more menacing appearance. This set is not compatible with the stock Hornet body. For the stock Hornet body, please use 058010-11. This chassis cage/body has been used on our race car for years and has never had any problems. In fact, the vintage, previously cracked and glued chassis has not had a single problem since the installation of this cage. It is advised that the front lights are not installed while under hard use as the area they install can be susceptible to very high stresses if the lamp you install is directly hit. We also only recommend a hot stock motor in a Hornet with any AMPRO upgrades.
Please see the installation video below prior to purchase.
To complete this installation, you will need the following:
Super Fly 1.0
045011-01Ampro Hornet Body,
Hood045012-01 Ampro Hornet Body Side, Left
045013-01 Ampro Hornet Body Side, Right
045014-01 Ampro Hornet Roof
Super Fly 2.0
045021-00 Body 2.0 Rear
045020-00 Body 2.0 Sides
045027-01 Ampro Hood 2.0
045023-01 Body 2.0 Tail Lights
045022-01 Body 2.0 Exhaust
045014-01 Ampro Body, Roof
Hardware List
2x 4.8mm Ball Studs with M3 thread shaft
2 M3 Nuts (not locking, those are too tall)
5x M3 Self Tapping Screws, 8mm
16x M3 Self Tapping Screws, 12mm
2x M3 Self Tapping Screws, Cut to 5-6mm L
2x M3 Washers, 0.5mm thick (pretty standard)
4x M3 Set Screws
Other optional parts depending on your design path:
045007-04 Hornet Shock Mount
045007-02 Ampro Wing Mount
045008-01 Ampro Wing