Halloween case for Micro Drone 3.0- 3D printed in orange nylon
Halloween case for Micro Drone 3.0
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$35.08
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
The perfect Micro Drone case for some Halloween pranks...
Halloween case for the Micro Drone 3.0 by "Extreme Flyers"
Multiply your drone-flying fun with this cool Drone case!
Mounting is super simple:
Just remove the default black lid of the Micro Drone and clip the upper part of the pumpkin onto
the rods. The lower part of the case snaps onto the upper part. It´s a pretty loose fit, so in case of a crash the lower half is likely to detach ...
Please note:This case was designed for the first version of Micro Drone 3 with 3 mm rods. For the newer Micro Drones with 4 mm rods you might have to cut open the mounting holes with a sharp blade.
For battery change you have to remove the lower part of the "Halloween case"!
Obviously you can not attach the camera to the drone while using the Halloween case.
You can, however, use just the upper part of the case. Looks cool also and allows you to use the camera...
This case is available in orange. I would advice you to paint the stem greenish ( as done with the one in the pictures..)
Please note:You should get some practice and feel secure in flying the Micro Drone before you use this decorative case. I designed this case as sturdy as possible and I crashed it several times myself without any damage. However, I can not guarantee that it will survive a crash at full speed.
Get the latest news, updates and see work in progress on facebook google+ instagram
Halloween case for the Micro Drone 3.0 by "Extreme Flyers"
Multiply your drone-flying fun with this cool Drone case!
Mounting is super simple:
Just remove the default black lid of the Micro Drone and clip the upper part of the pumpkin onto
the rods. The lower part of the case snaps onto the upper part. It´s a pretty loose fit, so in case of a crash the lower half is likely to detach ...
Please note:This case was designed for the first version of Micro Drone 3 with 3 mm rods. For the newer Micro Drones with 4 mm rods you might have to cut open the mounting holes with a sharp blade.
For battery change you have to remove the lower part of the "Halloween case"!
Obviously you can not attach the camera to the drone while using the Halloween case.
You can, however, use just the upper part of the case. Looks cool also and allows you to use the camera...
This case is available in orange. I would advice you to paint the stem greenish ( as done with the one in the pictures..)
Please note:You should get some practice and feel secure in flying the Micro Drone before you use this decorative case. I designed this case as sturdy as possible and I crashed it several times myself without any damage. However, I can not guarantee that it will survive a crash at full speed.
Get the latest news, updates and see work in progress on facebook google+ instagram
Details
What's in the box:
Halloween case for Micro Drone 3.0
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
