NEW: Natural and Polished Copper
LEARN MORE

Click and drag to rotate
120mm by 92mm Oval Wound Tracking Base 3d printed

DIGITAL PREVIEW
Not a Photo

120mm by 92mm Oval Wound Tracking Base 3d printed
120mm by 92mm Oval Wound Tracking Base 3d printed

DIGITAL PREVIEW
Not a Photo

120mm by 92mm Oval Wound Tracking Base 3d printed Model shown as an example and is not included.
120mm by 92mm Oval Wound Tracking Base 3d printed Model shown as an example and is not included.

DIGITAL PREVIEW
Not a Photo

120mm by 92mm Oval Wound Tracking Base 3d printed Only glue the bottom cap to the peg on the underside of the main base.
120mm by 92mm Oval Wound Tracking Base 3d printed Only glue the bottom cap to the peg on the underside of the main base.

DIGITAL PREVIEW
Not a Photo

120mm by 92mm Oval Wound Tracking Base 3d printed Only glue the bottom cap to the peg on the underside of the main base.
120mm by 92mm Oval Wound Tracking Base 3d printed Only glue the bottom cap to the peg on the underside of the main base.

DIGITAL PREVIEW
Not a Photo

120mm by 92mm Oval Wound Tracking Base 3d printed Painted example. Main base is primed black while the numbers were given a green wash.
120mm by 92mm Oval Wound Tracking Base 3d printed Painted example. Main base is primed black while the numbers were given a green wash.

DIGITAL PREVIEW
Not a Photo

120mm by 92mm Oval Wound Tracking Base 3d printed
120mm by 92mm Oval Wound Tracking Base 3d printed

DIGITAL PREVIEW
Not a Photo

120mm by 92mm Oval Wound Tracking Base

Made by
$19.51
3D printed in white nylon plastic with a matte finish and slight grainy feel.
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
A large oval base measuring 120mm long and 92mm wide, perfect for large monsters or vehicles. Contains a disk to be secured to the underside of the base which is numbered from 1 to 30 to track wounds or damage to the model. No more dice next to your models!

NOTE: Some assembly required (see images) and a cyanoacrylate glue is recommended. Always test-fit before assembly. While you do want some friction to keep the disk from spinning freely, too much may prevent it from turning at all. Due to minute imperfections in printing, you may need to lightly sand the edges of the disk if the fit is too tight. When assembling, be sure to only apply glue to where the peg on the under side of the main base will contact the cap piece. Be careful not to glue the rotating tracker disk in place! You will only need a small amount of glue and excess glue may seep out and end up adhering to the rotating disk. The cap is designed to account for some excess, but when it comes to super glue you don't need much. "A little dab'll do ya."
Details
What's in the box:
OVAL 120x92 30w
Dimensions:
16.8 x 0.3 x 9.2 cm
Switch to inches
6.61 x 0.12 x 3.62 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Sign In or Join to comment.
 
 
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.