You must be logged in and verified to contact the designer.
Compatible with parts: [url]https://www.shapeways.com/product/SR2XG239V/ikea-kvartal-glider-slider-female?optionId=61987888[/url] [url]https://www.shapeways.com/product/54FLQ49AF/ikea-kvartal-wheeled-glider-slider-female?optionId=61987921[/url] Screw size: .25"Lx .086"Dia. [url]https://www.mcmaster.com/90273a055[/url] Be aware if you order any of the metal versions of this part (Steel, aluminium, etc.) you might have to cut threads into the screw holes with a tap and die set if the your existing screws don't fit in the two screw holes designed into the part. This part has been printed, tested, and fits prexisting Ikea parts perfectly but be aware that 3D printed parts have a +/- tolerance of about .1mm so you might have to clean out some small holes with a toothpick or pin. Also areas with tight fits might need to be slightly filed or sanded. Nothing that takes more than a few seconds of work. If part breaks please contact me section so I can improve on the design. Need a part we don't have in our Shapeways store, don't worry we'll make it for you. Just fill out the "[b]Part Request Form[/b]" at [url]http://petesparts.infinitediscounts.com/[/url] and your request will automatically be emailed to us. Be sure to check out other parts we have in the shop by clicking [url=https://www.shapeways.com/shops/dsynmunky]IKEA Replacement Parts[/url]