3d render showing product detail
1/600 German Sturer Emil Tank Destroyer x10
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$20.99
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/600 Scale WW2 German Army Sturer Emil Tank Destroyer.
Contains 10 highly detailed tanks.
Contains:
Sturer Emil Tank Destroyer
The 12.8 cm Selbstfahrlafette auf VK30.01(H) "Sturer Emil" (German for "Stubborn Emil") was an experimental World War II German self-propelled anti-tank gun. It was based on the Henschel VK30.01 chassis and both armed with a Rheinmetall 12.8 cm K L/61 gun (based on the 12.8 cm FlaK 40). This gun could traverse 7° to each side, elevate 10° and depress -15°. It carried 15 rounds for the main gun.The chassis was left over from Henschel's submission for the canceled VK30.01 heavy tank program, but the hull was stretched and an extra road wheel added to accommodate the large gun, which was mounted on a pedestal ahead of the engine. A large, open-topped, fighting compartment was built where the turret was intended to go in the original design.
Two vehicles (named Max and Moritz) were built, both of which served on the Eastern Front. One vehicle was destroyed, the other captured at Stalingrad in January 1943, with 22 kill marks painted on the barrel. This captured vehicle is now displayed in the collection on the Kubinka Tank Museum.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Contains 10 highly detailed tanks.
Contains:
- 10x German Sturer Emil Tank Destroyers
Sturer Emil Tank Destroyer
The 12.8 cm Selbstfahrlafette auf VK30.01(H) "Sturer Emil" (German for "Stubborn Emil") was an experimental World War II German self-propelled anti-tank gun. It was based on the Henschel VK30.01 chassis and both armed with a Rheinmetall 12.8 cm K L/61 gun (based on the 12.8 cm FlaK 40). This gun could traverse 7° to each side, elevate 10° and depress -15°. It carried 15 rounds for the main gun.The chassis was left over from Henschel's submission for the canceled VK30.01 heavy tank program, but the hull was stretched and an extra road wheel added to accommodate the large gun, which was mounted on a pedestal ahead of the engine. A large, open-topped, fighting compartment was built where the turret was intended to go in the original design.
Two vehicles (named Max and Moritz) were built, both of which served on the Eastern Front. One vehicle was destroyed, the other captured at Stalingrad in January 1943, with 22 kill marks painted on the barrel. This captured vehicle is now displayed in the collection on the Kubinka Tank Museum.
Cleaning Information
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation
Details
What's in the box:
600 Sturer Emil X10.stl
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
