I created this to remove the dynawedge saddle bag straps and be able to mount my varia light at the same time.
You may have to make the holes on the top of the bag if this was not the type of mount your previously had.
The ring on the corner must be removed, only there to prevent the pieces from being separated during packaging.
Four M5 x 20mm Button Head Screws and nuts required, Not included (these are the same screws used by gopro etc, you can get them in any hardware store or online easily.)
For making the holes: Mark the place where the holes need to be by placing the plate on the top of the dynawedge and then perforate, I used a soldering iron which worked like a charm, but anything strong enough to puncture thru the material should do it, just be careful not to rip the cloth by applying too much force if you are using something not-heated. This product and/or service is not affiliated with, endorsed by or in any way associated with GoPro Inc. or its products and services. GoPro, HERO and their respective logos are trademarks or registered trademarks of GoPro, Inc.