You must be logged in and verified to contact the designer.
Insert pops into feed slot after making holes.
Squeezed and center the insert into feed slot.
for 8 1/4" long feed slot with squared ends. Track Depth = 6/8" and channel diameter is 5/8".
Use 1/6" drill bit and the location guide holes of the insert to mark the location for two holes.
Remove the insert to center punch and drill two 3/16" holes into back web of channel.
Use a larger drill bit to help remove any burrs or sharp edges.
The insert will now be able to pop into place. The bottom pins of insert prevent the insert from sliding out of place.
Use fishing needle nose plyers (look like hemostat) to squeeze and pull out the insert.