Gray PA12
Product Description
Spacer for HG P-407 (for Tamiya Bruiser, 048006-01 is needed)
The Tamiya Bruiser front and rear wheel track are inconsistent. The front track is 16mm narrower than the rear. Not only does this cause stability problems but it also looks weird. Now you can add a spacer to the front hub of your clone HG P407 to properly space the front wheels out. This will require 16mm M3 screws to hold the wheels on in place of the originals. Please note that the front hubs of the Tamiya Bruiser and Mountaineer are much larger and require part number 048006-01. The hub fitment should be tight as the concentricity of the spacer to the hub and spacer to the wheel is critical.
One order has both sides attached by a thin sprue that needs to be cut off flush.
The Tamiya Bruiser front and rear wheel track are inconsistent. The front track is 16mm narrower than the rear. Not only does this cause stability problems but it also looks weird. Now you can add a spacer to the front hub of your clone HG P407 to properly space the front wheels out. This will require 16mm M3 screws to hold the wheels on in place of the originals. Please note that the front hubs of the Tamiya Bruiser and Mountaineer are much larger and require part number 048006-01. The hub fitment should be tight as the concentricity of the spacer to the hub and spacer to the wheel is critical.
One order has both sides attached by a thin sprue that needs to be cut off flush.
Details
What's in the box:
P40701-01_0-1 Wheel Spacer
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
