1/200 IJN Destroyer 10 cm/65 Type 98 naval gun SET
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$27.34
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
1/200 scale very hi detailed and accurate model of 10 cm/65 Type 98 naval gun (六五口径九八式一〇糎高角砲), also known as the long 10cm high-angle gun (長10センチ高角砲), was a light caliber naval gun of the Imperial Japanese Navy used during World War II. It was employed on the aircraft carrier Taihō, the light cruiser Ōyodo, and Akizuki-class destroyers.
Suitable for: WWII IJN Ships aircraft carrier Taihō, the light cruiser Ōyodo, and Akizuki-class destroyers.
The 100 mm (3.9 in) L/65 caliber Type 98 gun utilized a horizontal sliding breech,These guns were used in twin gun turrets.
Real scaled from original
Hollowed to saved material.
Model unpainted.
If you need a different size or a custom part designed just for you?
Please send me a PM.
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.
During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured. Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Suitable for: WWII IJN Ships aircraft carrier Taihō, the light cruiser Ōyodo, and Akizuki-class destroyers.
The 100 mm (3.9 in) L/65 caliber Type 98 gun utilized a horizontal sliding breech,These guns were used in twin gun turrets.
Real scaled from original
Hollowed to saved material.
Model unpainted.
If you need a different size or a custom part designed just for you?
Please send me a PM.
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. Customers report that "Bestine" and "Goo Gone" also work well.
During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured. Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Details
What's in the box:
1/200 IJN Destroyer 10 cm/65 Type 98 naval gun
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$15.42
$15.65
