1/700 Scale German E-100 Adlerwerke Super Heavy Tanks.
Contains 10 highly detailed tanks.
E-100 Adlerwerke Super Heavy Tank
- 10x German E-100 Adlerwerke Super Heavy Tanks
The E-100 was originally designed as an Heereswaffenamt alternative to the Porsche-designed superheavy Maus tank. It was authorized in June 1943, and work continued in earnest until 1944 when Hitler officially ended development of superheavy tanks due to raw material scarcity. After Hitler's announcement, only three Adler employees were allowed to continue assembly of the prototype, and the work was given the lowest priority. Even with these handicaps, the three workers were able to virtually complete the prototype by war's end at a small Henschel facility near Paderborn. The prototype lacked only a turret (which was to be identical to the Maus turret save in armament).
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation