Click and drag to rotate
A-11 Rocket (Japan/Germany) 3d printed

Not a Photo

White Natural Versatile Plastic
A-11 Rocket (Japan/Germany) 3d printed
A-11 Rocket (Japan/Germany) 3d printed

Not a Photo

A-11 Rocket (Japan/Germany)

3D printed in white nylon plastic with a matte finish and slight grainy feel.

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
The A11 (Japan Rakete) was a design concept which would have acted as the first stage of a three-stage rocket, the other two stages being the A9 and A10.

The A11 design was shown by von Braun to US officers in Garmisch-Partenkirchen; the drawing was later published in 1946 by the US Army. The A11 was shown as using six of the large single-chamber engines proposed for the A10 stage, with a modified A10 second stage nested within the A11. The design also showed the winged A9, indicating a gliding landing or bombing mission. To achieve orbit, either a new "kick stage" would have been required, or the A9 would have to have been lightened. In either case, only a payload of approximately 300 kg (660 lb) could have been placed in a low earth orbit

What's in the box:
1.23 x 1.33 x 4.4 cm
Switch to inches
0.49 x 0.52 x 1.73 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.