NSWGR 7mm LQ LH Bracket Signal and Parts

This is a 27 foot main post bracket signal with a lower dolly post on the left hand side printed in White Strong and Flexible (WSF) material. The bracket signal post was usually used to indicate which track a train would be entering either the main line or the loop. The bracket could also indicate entry to other tracks or be a Home/Starter signal where there was restricted space. Signal post heights indicated the status of the track they were protecting. Similarly, signal arm placements and sizes followed the same rule. A set of detail parts containing a 39 inch signal arm and a 30 inch arm, other details such as finials (Finial - officially known by NSWGR as a Pinnacle), lamp tops, lamp 'backlight blind', cast ladder base and counterweight levers is included with this signal.  A spare part for the finial, lamp top, lamp 'backlight blind' and counterweight lever is included. A ladder for the signal is also needed and a sprue of two 21 foot ladders printed in Frosted Ultra Detail acrylic material can be purchased from this Signals Branch Shapeways Shop. If you wish you could instead purchase an etched brass ladder. A suitable etched brass ladder and a ladder forming jig are available from Keiran Ryan Models:    http://www.krmodels.com.au/7mm_kits.html Also required are some 0.015" phosphor bronze wire for operating rods, handrails and several small screws.