1/700 Scale French Lorraine 40t Medium Tanks.
Contains 10 highly detailed tanks.
Lorraine 40t Medium Tank
- 10x French Lorraine 40t Medium Tanks
The success of German and Soviet heavy tanks, like Tiger II and IS-2 (and also IS-3) excited French tank engineers and would literally not let them stay put. They were inspired, as was expected, by German and Soviet heavy tanks. The French engineers had developed several new tank models. Of course, they were neither the biggest, nor the heaviest examples, but ended up being quite spectacular armored vehicles nevertheless. It is likely that not only the glorious armor, but also firepower of the aforementioned steel monsters, being produced in Germany and USSR, became the source of the fixed idea of installing 100-mm (for starters) and then even 120-mm caliber guns. However, almost all of the produced tank projects would either, for one reason or another, had stayed in production for an indefinite amount of time or be made in limited quantities. As far as is known, almost all experimental machines used the German engine Maybach as a power source. As sad as it might be, the largest part of the French tank forces in that period was issued with “Sherman”, M-26, M-24 and also “Panther” tanks. Lorraine 40t had never left the testing phase, only two prototypes would be produced. Actually, this combat vehicle was a lighter version of the AMH-50 heavy tank, but some interesting construction solutions would distinct it from the others. Unlike it’s post-war predecessors (in this branch), the tower of this tank was installed inside of the front part of the body. Also, the tank had another characteristic – “pike nose”, like IS-3. It’s worth mentioning the rubber tires on the wheels of the running gear for added amortization.
Some part cleanup will be necessary. The 3D printing process uses a waxy substance to support certain part features during the printing process. Although the parts are cleaned by Shapeways, some waxy residue may remain. It can be safely removed with water and a mild aqueous detergent like "Simple Green" using an old, soft toothbrush, Q-tips or pipe cleaners. During the printing process, liquid resin is cured by ultraviolet light. Microscopic bits of resin may remain uncured.
Let your parts sit in direct sunlight for a few hours to fully cure the resin.
Water-based acrylic paints meant for plastics is strongly recommended. Other paints, especially enamels, may not cure on Frosted Detail 3D-printed plastics.
Use dedicated model sprue cutters to remove parts to minimise the risk of damage to parts.
Please take a look at my other items.
Painting tips and preparation