Click and drag to rotate
045013-01 Ampro Hornet Body Side, Right 3d printed

Not a Photo

White Natural Versatile Plastic
045013-01 Ampro Hornet Body Side, Right 3d printed
045013-01 Ampro Hornet Body Side, Right 3d printed

Not a Photo

045013-01 Ampro Hornet Body Side, Right

Print With Shapeways
Choose Your Material
Choose your color and finish

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
Ampro Engineering Introduces the ultimate upgrade for the Tamiya Hornet. This is a complete system that will not only increase the structural integrity of the Hornet Chassis but completely changes the look to a sleeker, more menacing appearance. This set is not compatible with the stock Hornet body and is needed if you want to add the 3rd shock cantilever in place of the transmission brace. This chassis cage/body has been used on our race car for years and has never had any problems. In fact, the vintage, previously cracked and glued chassis has not has a single problem since the installation of this cage. It is advised that the front lights are not installed while under hard use as the area they install can be susceptible to very high stresses if the lamp you install is directly hit. We also only recommend a hot stock motor in a Hornet with any AMPRO upgrades. To complete this installation, you will need the following:
045010-01 Ampro Hornet Cage
045011-01 Ampro Hornet Body, Hood
045012-01 Ampro Hornet Body Side, Left
045013-01 Ampro Hornet Body Side, Right
045014-01 Ampro Hornet Roof
What's in the box:
045013-01 Ampro Body Side, Right
1.67 x 3.64 x 17.68 cm
Switch to inches
0.66 x 1.43 x 6.96 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.