Click and drag to rotate
CMAX+XJ Front Body Mount 3d printed

Not a Photo

Black Natural Versatile Plastic
CMAX+XJ Front Body Mount 3d printed
CMAX+XJ Front Body Mount 3d printed

Not a Photo

CMAX+XJ Front Body Mount

Ships as soon as 8 days
3D printed in black nylon plastic with a matte finish and slight grainy feel.

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
This item will allow for Front frame mounting for CMAX on the hardbody XJ Jeep Cherokee. and MJ Comanche from
Please clean out all holes with 3/32" or 2.5mm drill. The inner 4 holes are designed to match CMAX front frame spacing, and should have M3x8 setscrews or M3x8 screws and locknuts installed.
This mount has 2 top facing screw holes that will line up with the front rad support screw holes in the XJ, if you decide to solid mount this part. It is not necessary to do this. The mount should be attached to the front of the CMAX chassis and then the front of the body will simply slide over the frame, no clips or attaching is necessary, as this mount will locate the front of the Jeep in a solid way with no slop. 
This mount also provides lower valance support to the Jeep part so it won't be damaged in trail riding. 
What's in the box:
XJ Mount F Block
1.57 x 2.87 x 12.12 cm
Switch to inches
0.62 x 1.13 x 4.77 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.