Click and drag to rotate
Ridley Noah Varia Mount Two Styles 3d printed

DIGITAL PREVIEW
Not a Photo

Black PA12
Ridley Noah Varia Mount Two Styles 3d printed
Ridley Noah Varia Mount Two Styles 3d printed

DIGITAL PREVIEW
Not a Photo

Ridley Noah Varia Mount Two Styles

$39.98
3D printed in nylon 12 material with a matte finish and slightly grainy feel.
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
Size specific Varia mounts for the Ridley Noah 'D' shaped seat post. Two styles are available.
  • Style #1 = SMALL
  • Style #2 = MEDIUM
Required hardware is listed with each particular syle chosen, please note they are different.

Style #1 (Choose SMALL when ordering)
This mount is easier to install because the clamping section is in two parts. Please cut the retaining rings and discard as they are not needed and are there to keep the sections together during printing.


Required Hardware (not included):
  • 2 - M3 (3 mm) x 12 mm socket head cap screws
  • 2 - M3 (3 mm) nylon insert lock nuts

Style #2 (Choose MEDIUM when ordering)
If you have issues with shreading the insides of your biking shorts because of a narrow stance and mounts that use bolts on the sides, here is a design that works. A single bolt placed on the rear side of the clamp moves it out of the way and prevents scrapping of your inner thighs. This Mount is size specific for the Specialized Tarmac SL7 'D' seat posts.

Required Hardware (not included):
  • 1 - M5 X 16 - 18 mm (5 mm x 16/18 mm) socket head cap screw
  • 1- M5 (5 mm) nylon insert lock nut

Suggested installation method
  1. Mark the height of your seat post and remove it from the frame.
  2. Install the mount by inserting from the bottom of the post and sliding it up.
  3. Reinstall the seat post
  4. Move the Varia mount to the desired location and insert an M5 X 12/14/16 mm (5 mm X 12/14/16 mm) socket head cap screw and an M5 (5 mm) nylon insert lock nut in the recesses on both sides of the mount.
  5. Tighten the screw, please do not torque it down tight, it only needs to be as tight as necessary to hold it in place.
  6. Mount the Varia and RIDE!
Details
What's in the box:
Ridley Noah Varia Mount Style #1 v3
Dimensions:
5.42 x 4.78 x 3.33 cm
Switch to inches
2.13 x 1.88 x 1.31 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.