Product Description
Model is under rework/updating faulte parts.
Look in to the holiday planning
Shapeways status:
[_] Just uploaded - Not tested/ordered by designer.
[X] Ordered by the designer.
[_] Ordered by customer.
[_] Ready to be order.
[_] This design has been ordered at least 5 times of customer (0)
----------------------------------------------------------------------------------------
2019-10-18: The model works as intended, will not redraw those parts.
----------------------------------------------------------------------------------------
Swedish text: Things to fix the list, before the audience sale of the model.
2019-10-11
Testbeställning 2019-09-30 i Smoothes Fine Detail Plastic
Bommens vikte behöver sättas fast och problemt med röd/vit lycktorna var kvar.
2017-01-05
Testbeställning FUD & FXD
Resultat: Sätt fast dubbel röd/vit lyckta bättre, annars var allt rakt och fint.
----------------------------------------------------------------------------------------
Tool list:
Pincet X-Type.
Breakaway Knife.
Small Screwdriver (To poke and clean with)
small Nail/Tacks (To poke and clean with)
Cutting disc on Mini MultiMachine.
Good eyesight or magnifying glass.
Good patience and steady hand.
Extra parts to complet the model:
Brass/Aluminium tube with outer diameter 3/32" (Oø 2.38/Iø 1.67mm diameter)
Sewing thread.
Super glue or suitable plastic glue.
RC Servo, gear motor or similar unit + drive the electronics to it.
"Small " LED on cable if you want the light on the boom to blink.
You may need to buy at least one extra to practice on, before know how this model is assembled together.
OBS
All dimensions in the design is calculated to be as close to scale (1:87) as the material allows.
Look in to the holiday planning
Shapeways status:
[_] Just uploaded - Not tested/ordered by designer.
[X] Ordered by the designer.
[_] Ordered by customer.
[_] Ready to be order.
[_] This design has been ordered at least 5 times of customer (0)
----------------------------------------------------------------------------------------
2019-10-18: The model works as intended, will not redraw those parts.
----------------------------------------------------------------------------------------
Swedish text: Things to fix the list, before the audience sale of the model.
2019-10-11
Testbeställning 2019-09-30 i Smoothes Fine Detail Plastic
Bommens vikte behöver sättas fast och problemt med röd/vit lycktorna var kvar.
2017-01-05
Testbeställning FUD & FXD
Resultat: Sätt fast dubbel röd/vit lyckta bättre, annars var allt rakt och fint.
----------------------------------------------------------------------------------------
Tool list:
Pincet X-Type.
Breakaway Knife.
Small Screwdriver (To poke and clean with)
small Nail/Tacks (To poke and clean with)
Cutting disc on Mini MultiMachine.
Good eyesight or magnifying glass.
Good patience and steady hand.
Extra parts to complet the model:
Brass/Aluminium tube with outer diameter 3/32" (Oø 2.38/Iø 1.67mm diameter)
Sewing thread.
Super glue or suitable plastic glue.
RC Servo, gear motor or similar unit + drive the electronics to it.
"Small " LED on cable if you want the light on the boom to blink.
You may need to buy at least one extra to practice on, before know how this model is assembled together.
OBS
All dimensions in the design is calculated to be as close to scale (1:87) as the material allows.
