You must be logged in and verified to contact the designer.
Chassis for Korbanth/Mastercraft Custom Sabers Y3
(combined parts, use a sharp hobby knife to take single components apart)
-Sabertec's Golden Harvest V3
-protected 18650 Li ion button top battery (3.7V) removable (gut out a keystone 1042P batteryholder
-22mm bass speaker (removable to access USB/SD)
-2.54mm/0.1" grid pin connectors for speaker (2 poles, fem: 2.5 x 5x 7mm, male: 2.5x5x3mm)
-High amp killswitch TS01CBE
-2x 3mm accent LED for switchplate LED and square piece LED illumination
This chassis is dedicated for a neopixel build and needs to be combined with a neopixel ocb holder of your choice.
For my switchsolution you will need to get the following items:
-strong glue/UV glue
-cylindric pin or magnets to trigger the tactile, try out how long you need to make it work
-thin 3M tape for even surfaces
-countersunk bolt/Screw (some hilts were delivered with an allen screw to hold the switch panel. To get the switchplate down onto the panely the screw head must be flsuh to the surface. Contact smith for thread size)
-flat metal housed tactiles with flat brass pin (5x5mm)
Takes a 22mm bass speaker (Veco for example)
Apply a good drop of hotglue behin the 22mm rim and insert quickly.
Made to use 2.54mm/0.1" grid pin connectors for speaker (2 poles, fem: 2.5 x 5x 8mm, male 2.5x5x3mm).
The install can be tricky due to the limited internal space.
Please contact me via facebook for install requests.