This is the GDNA v3.3 Bottom Feeder Mod for the DNA60.
Completely overhauled GDNA with major revisions. The internal is now just one part. The bottom plate attaches to the internal and the body slides down and off for battery changeouts, juice refills and access to the USB port. Top Cap and Body stay together with magnets.
Please note: If you are going to use the USB charger for the DNA60, this will be an advanced build mod that will require precision wire placement. The mod is very compact (3.6 x .97 x 2.1 inches) and you will be placing a lot of wires in a small space. If you do not use the USB charger board, its fairly straight forward...if you have modded before ;).
There are two different variants of internals, one that has screw securement for the charger board and one that doesnt (just use glue). You will need to purchase an internal to go with this body assembly.
Charger Hole Internal version: https://www.shapeways.com/product/FRGST5XST/dna60-bf-3-3-one-piece-internal-large-screen?optionId=61642238
No Charger Hole Internal version: https://www.shapeways.com/product/6D6W5PN6Y/dna60-bf-3-3-one-piece-internal-no-holes-large-scr?optionId=61642234
New ***DNA40 Version Internal https://www.shapeways.com/product/HJAEG73AC/?key=d7422ff858bc7eb76c1a4f40d29e0735
1) 1x Evolv DNA60 Large Screen (Charger board optional)
2) 2 x Keystone 1017 Battery Contacts http://www.mouser.com/ProductDetail/Keystone-Electronics/1017-1/?qs=wOxb8XianXhq6%252bfB2t0c2Q== (17 cents per unit)
3) 1 x 12mm Varitube BF 510 Connector http://www.varitube.com/VT-510--Bottom-Feeding-510--Self-Adjusting-or-Manual_p_402.html ($5.99 per unit)
4) 8 x 2.38mm x 2.38mm magnets https://www.amazingmagnets.com/show-metric-r094-094.aspx (13 cents per unit)
5) 2 x 18-8 Stainless Steel Phillips Flat Head Screws2-56 Thread Size, 3/8" Long
http://www.albanycountyfasteners.com/Phillips-Flat-Head-Machine-Screw-2-56-Stainless-p/1500000.htm?1=1&CartID=0 Part Number
1500044 (34 Cents for 25 units)
6) 2 x18-8 Stainless Steel Narrow Hex Nut2-56 Thread Size
http://www.albanycountyfasteners.com/Hex-Machine-Screw-Small-Pattern-Nuts-p/125580.htm Part Number
125580-0024 (30 cents for 25 units)
7) 2 x Ball Tact Switches http://www.mouser.com/Search/ProductDetail.aspx?R=KSJ0M43180SHLFTvirtualkey61170000virtualkey611-KSJ0M431LFT ($1.21 per unit)
8) 1 x Sealed Tact Switch http://www.mouser.com/Search/ProductDetail.aspx?R=KSA0M411_LFTvirtualkey61170000virtualkey611-KSA0M411-LFT (45 cents per unit)
If you use the screw securement internal for the charger use this type of screw:
2 x #0 screws 1/8" in length
http://www.albanycountyfasteners.com/Phillips-Flat-Head-Machine-Screw-0-80-Stainless-p/1490000.htm Part Number
1490000-0002 (15 Cents per unit)