Click and drag to rotate
Pinarello Dogma F RCT715 Mount Adapter 3d printed

DIGITAL PREVIEW
Not a Photo

Black PA12
Pinarello Dogma F RCT715 Mount Adapter 3d printed
Pinarello Dogma F RCT715 Mount Adapter 3d printed

DIGITAL PREVIEW
Not a Photo

Pinarello Dogma F RCT715 Mount Adapter

$39.98
3D printed in nylon 12 material with a matte finish and slightly grainy feel.
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
A Garmin Varia RCT715 seat post mount specifically sized to fit the profile of the MY21+ Dogma F series (non-numbered) bicycles. It is a base mount adapter and requires the use of the original Garmin RCT715 mount. This adapter replaces the assortment of rubber shims to provide a secure mount direct to your seat post.

Here is a simple description of how to use this base module...
  1. Remove the two torx screws from the back side of Garmin's supplied RCT715 mount using a T9 torx bit or torx driver. Save these screws as they will be reused. Do not lose them, they are small.
  2. Separate the back from the front of the Garmin mount and set aside the rear portion, we no longer need this section of the mount.
  3. Attach the front half of the Mount Adapter onto the back side of the remaining section of the RCT715 mount and secure with the two screws you set aside earlier.
  4. Attach the newly completed mount onto your saddle with two M-3 (3 mm)  x 14 mm socket head socket screws.
  5. You can use this arrangement exactly like the original Garmin RCT715 mount.

Required Hardware (not included):
  • 2 - M3 (3 mm) x 14 mm socket head cap screws
  • 2 - M3 (3 mm) nylon insert lock nuts

This product is not endoresed by Garmin Ltd or CICLI PINARELLO SRL. All trademarks are owned by their prespective rights holder.
Details
What's in the box:
Pinarello Dogma F RCT715 Mount A v4
Dimensions:
5.63 x 3.57 x 6.05 cm
Switch to inches
2.22 x 1.41 x 2.38 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.