Click and drag to rotate
M26X & M26D TD=20.7mm, 7"Spread 3d printed

Not a Photo

Orange Processed Versatile Plastic
M26X & M26D  TD=20.7mm, 7"Spread 3d printed
M26X & M26D  TD=20.7mm, 7"Spread 3d printed

Not a Photo

M26X & M26D TD=20.7mm, 7"Spread

Ships as soon as 7 days
3D printed in bright orange, richly colored nylon plastic with a smooth finish.

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
Select color before ordering.  White un-dyed nylon is lease cost.

Youtube video link is of the older two-piece version that required a wire pull tool.  This new single-piece version only needs a needle nose or fishing pliers to squeeze and pull out.

IMPORTANT: Track Depth at the track gap should 20.7mm and a spread open slot of 7"  by 3/4" wide.  Sail slug must be 3/8" or 9mm.  1/2" slugs will not pass.

Use the bottom hole of the insert to mark the location to drill an 11/64"  hole into the aluminum back web.  
Use a 1/16" hex key to install a  6-32 x 3/8" set-screw into the bottom pad eye till it protrudes 1/8" below the bottom. 
The setscrew will act as a stop-pin when mated into the web hole.  This will prevent the insert from sliding out of position during reefing and hoisting.

Register your purchase for free install help at

COLOR SELECTION:  dyed Black for best UV protection, dyed Orange for best viewing by crew members.

Do not cut end tips for fitting.   contact Tom Luque to request a different size to be built for you.

2-year warranty / build version V.21.5
What's in the box:
2.15 x 6.97 x 16.71 cm
Switch to inches
0.85 x 2.75 x 6.58 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.
Sign In or Join to comment.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.