Mount a Bontrager Flare or Flare RT under and between your saddle rails. The mount uses two 4 mm zip-ties to secure in placer on the saddle rails. No other hardware is necessary.
Note: Three sizes available, the large version extends below the saddle rails to allow easy installation and removal of the Bontrager Flare tail light, the small version places the tail light between the rails and tucked much further up. Small and Extra Small versions will only work with the square Flare (2019). The Small mount is rotated 90° so thet the Flare may be installed and removed from the bottom of the mount. The Extra Small mount places the Flare in it's normal horizontal orientation and will prevent the Flare form being removed without first removing the entire mount from the saddle rails. All versions will fit oval 7 mm x 9 mm rails.
Please select proper size
Large = mounts Flare below rails
Small = mounts Flare vertically between rails (see note above)
Extra Small = mounts Flare horizontazlly between rails (see note above)
Multi Jet Fusion PA12 vs Versatile Plastic, why choose MJF PA12.
All 3D prints are made from the same raw white Nylon materials. Black Natural Versatile Plastic is a print that comes straight out of the printer, is cleaned and then placed in a black dye bath. Black Natural Versatile Plastic is not polished or surface finished in any other manner. The result is a grainy/fuzzy surface texture. All other Versatile Plastic parts are polished before dyeing and have a satin sheen as a result of the polishing process. MJF PA12 starts with similar raw material and a liquid binder (gray) resulting in more even and saturated color when dyed. MJF PA12 has a matte finish and slight grainy feel. The technology used in MJF PA12 produces a stronger print.