Click and drag to rotate
Contour Picatinny Mount Adapter 3d printed

DIGITAL PREVIEW
Not a Photo

Contour Picatinny Mount Adapter 3d printed
Contour Picatinny Mount Adapter 3d printed

DIGITAL PREVIEW
Not a Photo

Contour Picatinny Mount Adapter 3d printed
Contour Picatinny Mount Adapter 3d printed

DIGITAL PREVIEW
Not a Photo

Contour Picatinny Mount Adapter 3d printed
Contour Picatinny Mount Adapter 3d printed

DIGITAL PREVIEW
Not a Photo

Contour Picatinny Mount Adapter 3d printed
Contour Picatinny Mount Adapter 3d printed

DIGITAL PREVIEW
Not a Photo

Contour Picatinny Mount Adapter 3d printed
Contour Picatinny Mount Adapter 3d printed

DIGITAL PREVIEW
Not a Photo

Contour Picatinny Mount Adapter 3d printed
Contour Picatinny Mount Adapter 3d printed

DIGITAL PREVIEW
Not a Photo

Contour Picatinny Mount Adapter

Made by
$23.99
3D printed in black nylon plastic with a matte finish and slight grainy feel.
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
This AirPower3D product is the Picatinny mount adapter for the Contour series of video cameras. It allows you to install your Contour bulletcam to your airgun, airsoft gun, Nerf blasters, or paintball marker's Picatinny accessory rail. It is compatible with the following Contour models:

1) ContourROAM
2) Contour ROAM2
3) Contour ROAM3
4) CoutourHD
5) Contour+2
6) Contour+2 HD
7) Contour+
8) Contour 3330 Waterproof Case
9) VholdR 1102

It will also be compatible with new Contour video camcorders that uses the same bracket as the models shown above.

You will need a M5x25mm (or #10-32x1") screw and a nut to fasten the Contour action cam onto the Picatinny rail. The screw and nut are not included, but can be easily sourced from your local hardware store (e.g. Home Depot, Lowes, etc.).

Stainless steel #10-32x1" screws:
http://www.amazon.com/gp/product/B074ZMY1MH?ie=UTF8&tag=airpower3d-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=B074ZMY1MH

Stainless steel #10-32 nuts:
http://www.amazon.com/gp/product/B000BQM0U6?ie=UTF8&tag=airpower3d-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=B000BQM0U6

The Contour Action Cam may feel loose on the adapter at first. But once the adapter is screwed down on the Picatinny rail, the tension will tighten the Contour Action Cam onto the mount adapter. Note that this adapter is build to Picatinny specification. This adapter may work with some Weaver accessory rails. But if your rail is not made to the Picatinny standard, then this adapter may not fit properly and may require customization and expert installation. Picatinny rail specification is published on Wikipedia:
http://en.wikipedia.org/wiki/Picatinny_rail

We now have a completely new and better design of this adapter here:
https://www.shapeways.com/product/UP6CH9RN5/contour-action-cam-picatinny-mount-adapter?optionId=55550370

It is possible for an extreme force to knock the Contour Action Cam off this mount (or any mount for that matter). Therefore, the Contour video camera should be tethered (via its tethering slot) to the equipment, in addition to being mounted via this adapter.

Camera equipment and Picatinny equipment used for illustration of this Contour Video Camera Picatinny Weaver Mount are not included.

WARNING: Although you can use this mount adapter to fasten your Contour video camera to your real firearm, this adapter has never been tested with real firearms before. We do not know if the firearm heat/recoil will or will not damage the Contour camera and this mount. Use it with real firearms at your own risk.

Testimonial from one of our customers: "Works well with recoil" - 6***u (81 stars)

AirPower3D improved the original designs. Original designs made available via Creative Commons - Attribution - Share Alike license here:
http://www.thingiverse.com/thing:88950 (by Christian L. E. aka lobster2b)

Official AirPower3D retail partner. AirPower3D High Performance Plus (HP+) products are 3D printed using nylon polymer, shown in the photo, and are exceptionally strong. We can print to order any products in the AirPower3D full catalog. Check out our web site:
http://www.airpower3d.com/
Details
What's in the box:
Contour Picatinny Mount Adapter
Dimensions:
2.9 x 1.77 x 4 cm
Switch to inches
1.14 x 0.7 x 1.58 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.