You must be logged in and verified to contact the designer.
Mini-z front single piece suspension bulkhead for double-A-arm suspension parts. Standard A-arm front track width. Holes need finalizing for correct sizes (1.5mm, 2.0mm, and M2 thread). Will fit MR03 and MR03VE. It does require the other parts of a standard MR02/MR03 double-A-arm front end. The fitment of the parts cannot be guaranteed, but have been tested on track. The upper arm has 8 degree reactive caster angle. Both the upper and lower axle has room for a shim to fine tune caster and fittment of parts. This part will simplify the tuning of the front end of a double A-arm front end and remove much of the unwanted slop. Parts probably will need fine tuning for best fit and slop-free operation.