Adapter to install a Teensy Saber V3 soudnboard into the Prizm5.1 slot of our MultiBoards Adaptive Chassis or Prizm5.1 Chassis.
(Make sure the destination chassis has room enough for the Teensy boards assembly, eventually slight modifications might be required on older chassis <June2018).
Check the pictures:
1) The 2 teensy board are first joined, Teensy Saber on the bottom with SD card slot facing up, Teensy board on top with USB port facing up. If connector pins are not used to connect both baords together, the gap between both PCB must not exceed 2.4mm.
2) Insest and glue the soundboard assembly into the adapter.
3) Glue the adapter on the Prizm5.1 slot (once the soundboard wired).