You must be logged in and verified to contact the designer.
Product Description
IMPORTANT! Your mast must have a Track depth of 17mm and feed slot of 5 3/4" x 1/2".
Make color selection before clicking the order button.
Select ORANGE for best viewing or BLACK for best UV protection or WHITE natural nylon for the best price.
Review at StingySailor: https://stingysailor.com/2018/03/03/product-review-mastgates-sail-track-gates-2/
Nipple DRILLING INSTALLATION:
The insert sleeve is symmetrical, with two protruding nipple pins.
Insert a #55 drill bit (or a finishing nail of the same diameter) into each nipple's drill guide hole before centering the insert into the feed slot.
Lightly hammer the drill bit to make a mark into the aluminum back web.
Remove the insert to center punch the drilling locations. First, use 1/8" drill bits, then finish drilling holes with a 3/16" drill bit. Hand twist a larger drill bit in the holes to remove burrs.
Nipple pins of the nylon insert will key into the holes to prevent unintentional sliding of the insert.
REMOVAL:
Top & Bottom ends of the insert sleeve have outer edge notches. Squeezing notches together with needle-nose of hemostat plyers makes it easy to pull the insert up & out.
Top & Bottom end notches of the insert are for squeezing with tweezer, needle-nose or hemostat plyers to pull the insert up & out.
Reviewed on StingySailor: https://stingysailor.com/2018/03/03/product-review-mastgates-sail-track-gates-2/
Please Register your purchase at Info@MastGates.com for a free Two Year Warranty replacement.
Your name, email, City & State, the item you ordered, yr-make-model of the sailboat.
For free 2-year warranty and support, please register your purchase with:
Name, phone number, email, the part number ordered, sailboat's year, make & model to: Tom Luque at info@MastGates.com
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: