NanoVNA2 Housing for 4inch-TFT Top Part

custom housing for the new NanoVNA2 (https://www.nanorfe.com)  tailored for using this 4'' TFT Dispaly 
http://www.lcdwiki.com/4.0inch_SPI_Module_ST7796
When order you need to see ST7796S driver, XPT2046 for touch.
And 14pin display connector + 4 pin SD card connector (4 pin not used)
e.g. from aliexpress

you need the Bottom Part too, some M3 thread inserts (4x with flange-head ,4x without), 
4x M3 countersunk screws, a small power switch, a LiPo  and a JST-XH 2.54mm connector if the LiPo has an other connector

Its still WIP, im waiting for the TFT still, but used the datasheet from the webpage to prepare the housing
im doing my testprints on a Makerbot Method X in ABS.
If you want an FDM print rather than expensive SLS form Shapeways, please contact me

Update 6.7.2020: minor adjustments and added mounting holes for the switch
Update 8.7.2020: some optimisations
Update 13.7.2020: storage for stylus added, TFT still hastn arrived yet
Update 10.8.2020: isible screen dimensions/position is wrong in the datasheet or it was flipped somehow, after i got my TFT i could adjust it properly
working now