Colonies & Factories (65 -70 pcs) - High Frontier
Made by
Print With Shapeways
Choose Your Size
Choose Your Material
Choose your color and finish
Choose Your Size
$49.55
Choose Your Material
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Colonies and Factories tokens for High Frontier boardgame (or anything else you fancy).
65 or 70 pcs on a sprue (be careful when cutting it).
These tokens can be put on the Oupost/claim tokens, in the corresponding recess (check the "High Frontier" section of my shop for these).
Two set "sizes" :
- Medium : 65 pcs (35 Colonies + 30 Factories)
- Large : 70 pcs (35 Colonies + 35 Factories, for "High frontier 4 All" Edition)
Select the desired size in the top-right menu.
Colonies have a hole under so you can put them over the factories.
Factories have a 3mm diameter (0.12") hole under to fit on a flight stand (Litko, stuff4games, Hawk Wargames, or equivalent).
Dimensions are 15mm diameter, about 8.5mm height (0.6" d, 0.33" h).
The model comes unpainted. It has a single colour.
If you want to paint it, the process is almost identical to any regular plastic miniature. Some recommendations:
- With White Plastic : Wash the model, to remove any remaining nylon powder. Use soapy water, rub with toothbrush, rinse, let dry. Spray prime (you can apply more primer coats than usual, though), paint, spray varnish.
Due to manufacturing tolerances, the holes might need some rework to fit nicely (factories on the flight stand's peg or colonies on the factories).
The flight stands are not included, of course.
Check the High Frontier and Fleet Commander sections of my shop for more S-F stuff.
65 or 70 pcs on a sprue (be careful when cutting it).
These tokens can be put on the Oupost/claim tokens, in the corresponding recess (check the "High Frontier" section of my shop for these).
Two set "sizes" :
- Medium : 65 pcs (35 Colonies + 30 Factories)
- Large : 70 pcs (35 Colonies + 35 Factories, for "High frontier 4 All" Edition)
Select the desired size in the top-right menu.
Colonies have a hole under so you can put them over the factories.
Factories have a 3mm diameter (0.12") hole under to fit on a flight stand (Litko, stuff4games, Hawk Wargames, or equivalent).
Dimensions are 15mm diameter, about 8.5mm height (0.6" d, 0.33" h).
The model comes unpainted. It has a single colour.
If you want to paint it, the process is almost identical to any regular plastic miniature. Some recommendations:
- With White Plastic : Wash the model, to remove any remaining nylon powder. Use soapy water, rub with toothbrush, rinse, let dry. Spray prime (you can apply more primer coats than usual, though), paint, spray varnish.
Due to manufacturing tolerances, the holes might need some rework to fit nicely (factories on the flight stand's peg or colonies on the factories).
The flight stands are not included, of course.
Check the High Frontier and Fleet Commander sections of my shop for more S-F stuff.
Details
What's in the box:
Colonies & Factories (65 pcs) - High Frontier
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$15.67
$15.67
$15.68
$15.68
