TF Combiner Wars Truck Matrix adapter
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$8.17
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
This is an adapter for the Transformers Prime Masters to fit onto Combiner Wars Optimus Prime or Motormaster.
This plugs onto the pegs on the chest of Optimus or Motormaster in combined mode. There are foot pegs for a prime master to stand next to the center of the adapter. The Combiner chest can close with this part mounted on the figure. A 5 mm port on the bottom of the design allows it to be pegged onto other transformers. This is compatible with Combiner Wars Voyager class Optimus Prime, Motormaster and or other similar figures based on the voyager truck mold.
This is intended for adult figure collectors. This is not designed for rough play by children.
This was printed and tested on my home 3D printer with ABS plastic. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been Successfully printed in Shapeways Smooth Fine Detail Plastic, Smoothest Fine Detail Plastic, Natural Versatile Plastic, Processed versatile Plastic and Premium Versatile Plastic
Edit: This design has been updated with Additional Details 10/2023.
For replacement hands for Combiners, please see my other product here:
https://www.shapeways.com/product/R5SWZYF8H/tf-legacy-big-hand-set-for-junk-robot-or-combiner
This plugs onto the pegs on the chest of Optimus or Motormaster in combined mode. There are foot pegs for a prime master to stand next to the center of the adapter. The Combiner chest can close with this part mounted on the figure. A 5 mm port on the bottom of the design allows it to be pegged onto other transformers. This is compatible with Combiner Wars Voyager class Optimus Prime, Motormaster and or other similar figures based on the voyager truck mold.
This is intended for adult figure collectors. This is not designed for rough play by children.
This was printed and tested on my home 3D printer with ABS plastic. Depending on the plastic you choose, sanding or polish may be needed to fine tune the fit.
This has been Successfully printed in Shapeways Smooth Fine Detail Plastic, Smoothest Fine Detail Plastic, Natural Versatile Plastic, Processed versatile Plastic and Premium Versatile Plastic
Edit: This design has been updated with Additional Details 10/2023.
For replacement hands for Combiners, please see my other product here:
https://www.shapeways.com/product/R5SWZYF8H/tf-legacy-big-hand-set-for-junk-robot-or-combiner
Details
What's in the box:
CW Matrix Chest Armor v4
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
