White Natural Versatile Plastic
Cloudburst/Micronus Face
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$8.04
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
A replacement face-kit for Transformers: Titans Return Titan Master figures and Power of the Primes Prime Master figures. While compatible with almost any Titan/Prime Master mini-figure, you can use this kit to convert Power of the Primes Micronus into G1 Cloudburst, his original inspiration.
-
This kit is available in a four pack consisting of Submarauder/Alchemist Prime, Metalhawk/Vector Prime, Cloudbusrt/Micronus and Skullgrin/Leige Maximo.
-
hese kits allow for customization of the face while keeping the moving parts and head/body connection from the mass-produced figure for the best fit between head and body.
-
This replacement faceplate connector has been tested using Titan Wars Skullsmasher and Blurr, and should be compatible with most Titan Master mini-figures. As prints vary, some sanding/trimming may be required, and some Titan Masters (like Blurr) lack the rectangular connection peg and gluing may be required to fully secure the face.
-
Some fine details may not show up clearly on prints in strong & flexible plastic.
-
Instructions:
Use a toothpick or pin to remove any support material inside the connector ports on the back of the face.
Paint and seal as desired. Detail plastic prints will need a light washing with soap and water prior to painting to remove support material residue.
Unscrew the screw in the Titan Master's chest. Remove the original face-plate. Place the new face plate on the figure, replace the screw.
The port does not come pre-threaded, so the initial installation will be tight. If the screw connection is too loose you can secure it with a drop of superglue inside the port prior to reinstalling the screw.
-
First wave Prime masters are pinned. There's no easy way to seperate those parts, you'll have to prize it open.
-
Updated 1/22/18: Model updated to improve fit in Prime Master Decoy Suits.
-
This kit is available in a four pack consisting of Submarauder/Alchemist Prime, Metalhawk/Vector Prime, Cloudbusrt/Micronus and Skullgrin/Leige Maximo.
-
hese kits allow for customization of the face while keeping the moving parts and head/body connection from the mass-produced figure for the best fit between head and body.
-
This replacement faceplate connector has been tested using Titan Wars Skullsmasher and Blurr, and should be compatible with most Titan Master mini-figures. As prints vary, some sanding/trimming may be required, and some Titan Masters (like Blurr) lack the rectangular connection peg and gluing may be required to fully secure the face.
-
Some fine details may not show up clearly on prints in strong & flexible plastic.
-
Instructions:
Use a toothpick or pin to remove any support material inside the connector ports on the back of the face.
Paint and seal as desired. Detail plastic prints will need a light washing with soap and water prior to painting to remove support material residue.
Unscrew the screw in the Titan Master's chest. Remove the original face-plate. Place the new face plate on the figure, replace the screw.
The port does not come pre-threaded, so the initial installation will be tight. If the screw connection is too loose you can secure it with a drop of superglue inside the port prior to reinstalling the screw.
-
First wave Prime masters are pinned. There's no easy way to seperate those parts, you'll have to prize it open.
-
Updated 1/22/18: Model updated to improve fit in Prime Master Decoy Suits.
Details
What's in the box:
cloudburst
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$23.99
$21.15
