NEW: Natural and Polished Copper
LEARN MORE

Click and drag to rotate
Coaster 840, Superstructure & Hatches (1:200, RC) 3d printed parts of this set and completed model

DIGITAL PREVIEW
Not a Photo

parts of this set and completed model
Coaster 840, Superstructure & Hatches (1:200, RC) 3d printed parts of this set and completed model
Coaster 840, Superstructure & Hatches (1:200, RC) 3d printed parts of this set and completed model

DIGITAL PREVIEW
Not a Photo

Coaster 840, Superstructure & Hatches (1:200, RC) 3d printed total coaster model (assembled, painted)
Coaster 840, Superstructure & Hatches (1:200, RC) 3d printed total coaster model (assembled, painted)

DIGITAL PREVIEW
Not a Photo

Coaster 840, Superstructure & Hatches (1:200, RC) 3d printed detail of total coaster model (assembled, painted)
Coaster 840, Superstructure & Hatches (1:200, RC) 3d printed detail of total coaster model (assembled, painted)

DIGITAL PREVIEW
Not a Photo

Coaster 840, Superstructure & Hatches (1:200, RC) 3d printed all parts of the kit for coaster
Coaster 840, Superstructure & Hatches (1:200, RC) 3d printed all parts of the kit for coaster

DIGITAL PREVIEW
Not a Photo

Coaster 840, Superstructure & Hatches (1:200, RC) 3d printed total coaster model (assembled, painted) on display stand
Coaster 840, Superstructure & Hatches (1:200, RC) 3d printed total coaster model (assembled, painted) on display stand

DIGITAL PREVIEW
Not a Photo

Coaster 840, Superstructure & Hatches (1:200, RC) 3d printed Customer model (thanks for sharing the picture)
Coaster 840, Superstructure & Hatches (1:200, RC) 3d printed Customer model (thanks for sharing the picture)

DIGITAL PREVIEW
Not a Photo

Coaster 840, Superstructure & Hatches (1:200, RC) 3d printed
Coaster 840, Superstructure & Hatches (1:200, RC) 3d printed

DIGITAL PREVIEW
Not a Photo

Coaster 840, Superstructure & Hatches (1:200, RC)

$62.04
3D printed in white nylon plastic polished to reveal a smooth matte finish.
QTY

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
Parts in "Strong & Flexible Polished" material to complete the model of the a coastal transport vessel of the GDR Nordstern series in 1:200 scale:
  • superstructure
  • both hatches
To complete a coaster, three different sets of 3D prints are needed:If you want to build only a static model (no radio control function). With the parts, you can either build a static model or a working model that is controlled via radio control (RC). For an RC model, you need additional components (not available through Shapeways). Building an RC model requires the advanced skills and experience to complete the model.To build an RC model, the following parts are needed:
  • one 4 gram servo for steering (recommended: ES-07 by Modelcraft)
  • one motor N20 (DC Ø 12mm x 15mm) for main propulsion
  • one shaft of 68mm length (recommended: Graupner 413)
  • one propeller of no more than 13mm diameter (recommended: Prop Shop STD/0550/3/RH/BR or STD/0550/3/LH/BR)
  • coupling hose (recommended: Robbe R 1386)
During the years 1960 until 1963,  26 units of the coastal transport vessels of the "Serie Nordstern", also referred to as "Kümo 840" (see the article in Wikipedia, unfortunately, only available in German currently) were built by Peene Werft, a major shipyard in the former German Democratic Republic (GDR). As a successor to the earlier Kümo 500, they were larger and had a larger transport capacity. All units were named after stars in the Northern hemisphere and after towns and villages in the former GDR.Technical data of the original:
  length:      59.4 m
  width:         9.8 m
  propulsion: 1 diesel engine of 405 kW
  capacity:     max. 760 tons in two loading baysThe model is designed in 1:200 scale. It is set up to be built as a functional model with radio control. However, it can also be built as a static model for display. In addition to the propulsion system and steering, both cranes can be made operational. For each crane, two additional 4 gr servos (recommended: ES-07 by Modelcraft) are needed. An assembly manual, a set of drawings and further informations can be found on my website (download section):http://www.microboathobby.com/  
Details
What's in the box:
Coaster 840, Superstructure & Hatches (1:200, RC)
Dimensions:
22.56 x 4.9 x 3.73 cm
Switch to inches
8.88 x 1.93 x 1.47 inches
Switch to cm
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
Sign In or Join to comment.
 
 
Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.