*** Teradek Bolt Bracket designed for the most recent Bolt Pro fanless receiver (with ribs). This will not fit the new Bolt 300. For a bracket compatible with the Bolt 300 receiver, see here. For a bracket compatible with the first generation Bolt Pro receiver (with fan), see here.
The Teradek Bolt Bracket cradles the receiver and allows you to mount the receiver onto the back of a TV Logic VFM-056 or VFM-058 monitor. Can be paired with the customized Tv Logic Battery Plate with Lemo connector for an all-in-one wireless solution.
Requires the use of 4x M3 x 8mm screws to screw into the threaded holes on the back of the monitor. If you already have the stock battery plate for your monitor, you already have these screws.
You can also screw your existing battery plate onto this Bolt Bracket (so the bracket is sandwiched between the monitor and your battery plate.) You need 4x M3 nuts (they press fit into the ears that stick out) and 4x M3 x 10mm screws to hold the bracket and battery plate together.
The Bolt Bracket has cutouts for the two HD-SDI ports, the Lemo connector, USB and mini-plug. The antennas in the Bolt receiver are in the top portion of the unit, and they remain clear of obstruction for good signal reception.
The lug on the left side is meant to accommodate the tapping and installation of a 1/4-20 helicoil. This allows you to use a 1/4-20 nylon thumbscrew to lock the Bolt in place.