Click and drag to rotate
Verity Carlo Heads (Mega Construx) 3d printed

Not a Photo

White Natural Versatile Plastic
Verity Carlo Heads (Mega Construx) 3d printed
Verity Carlo Heads (Mega Construx) 3d printed

Not a Photo

Verity Carlo Heads (Mega Construx)

Print With Shapeways
Choose Your Material
Choose your color and finish

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
For customizing Mega-Construx figures into Verity Carlo from the IDW Transformers Wreckers comics. This set of three heads includes an unhelmeted head, a helmeted head with open visor, and a helmeted head with closed visor. A full figure kit wtih these heads included is available here.
What are PrintPrize Heroes?: PintPrize Heroes are 2" scale action figure kits that typically with six points of articulation (Ball jointed hips, ball jointed neck, swivel waist, and swivel shoulders) Each part is interchangible with the equivalent part in a Mega Construx figure* (PintPrize Arms for Mega Construx arms, legs for legs, waist for waist, etc.) and visa-versa. 
Mix-and-Match parts with any of our Mega Construx replacement heads and swap parts been PintPrize Kits to create YOUR hero/villain of choice.
*Non-standard parts, like tails, may not be cross-compatible. 
Prize Inside! Assembly Tips:
Parts can be de-sprued with a pair of clippers, and any remaining nubs can be scanded down. 
We recommend with any figure kit that you check the parts prior to assembly for support material.  The joints are designed to fight tightly with a raw, unpainted print. However, the support material (a powder or wax-like substance depending on print type) can remain in parts after printing. Before assembly, scrape out any sockets with a wooden or plastic toothpick to remove any lingering material. If you are painting the figure, some sanding may be required to compensate for the additional thickness.
A note about Smooth Detail Plastic and Ball Joints - The ball joints on this figure kit have been designed to be durable even in the more-brittle Smooth Detail Plastic.  However, Smooth Detail is a relatively fagile material, and care is recommended.  When posing, grip near the joint and avoid excess force. If parts provide resistance during assembly, sand the ball joint before application. 
PA12 prints slightly thicker than versatile and will typically require sanding of the balljoints prior to assembly.
What's in the box:
3.61 x 1.81 x 1.06 cm
Switch to inches
1.42 x 0.71 x 0.42 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.