Click and drag to rotate
Look 795 RS MY22 Garmin RCT715 Mount Adapter 3d printed

Not a Photo

Black PA12
Look 795 RS MY22 Garmin RCT715 Mount Adapter 3d printed
Look 795 RS MY22 Garmin RCT715 Mount Adapter 3d printed

Not a Photo

Look 795 RS MY22 Garmin RCT715 Mount Adapter

Print With Shapeways
Choose Your Material
Choose your color and finish

Have a question about this product?

contact the designer
You must be logged in and verified to contact the designer.
Product Description
A Garmin Varia RCT715 seat post mount adapter specifically sized to fit the profile of the Look 795 RS seat post equipped bicycles for model year 2022 (It may fit others, contact your Look dealer for specifics). It is a base mount adapter and requires the use of the original Garmin RCT715 mount. This adapter replaces the assortment of rubber shims to provide a secure mount direct to your seat post. This mount adapter does NOT fit the Varia taillight / radar units.

Here is a simple description of how to use this base module...
  1. Remove the two torx screws from the back side of Garmin's supplied RCT715 mount using a T9 torx bit or torx driver. Save these screws as they will be reused. Do not lose them, they are small.
  2. Separate the back from the front of the Garmin mount and set aside the rear portion, we no longer need this section of the mount.
  3. Attach the front half of the Mount Adapter onto the back side of the remaining section of the RCT715 mount and secure with the two screws you set aside earlier.
  4. Attach the newly completed mount onto your saddle with two M-3 (3 mm)  x 14 mm socket head socket screws.
  5. You can use this arrangement exactly like the original Garmin RCT715 mount.

Required Hardware (not included):
  • 2 - M3 (3 mm) x 14 - 18 mm socket head cap screws
  • 2 - M3 (3 mm) nylon insert lock nuts

This product is not endoresed by Garmin Ltd or LOOK Cycle International SAS . All trademarks are owned by their prespective rights holder. No warranties expressed or implied as to fitness for purpose.
What's in the box:
Look 795 RS RCT715 Mount MY22 v2
6.58 x 4.38 x 6.09 cm
Switch to inches
2.59 x 1.73 x 2.4 inches
Switch to cm
Success Rate:
First To try.
What's this?
Mature audiences only.


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.